Gain Staging

Getting the right levels in your mix is the very first part of the recording process. Paying attention to your input levels can pay dividends when it comes to the mixing process. Proper levels will yield a much more streamlined workflow when it comes to sitting down to mix.

So you maybe asking yourself, “What are the proper levels that I should be trying to achieve?“

The answer to this question can vary. You have to have a vision for the end result. If you don’t have that vision, then you should focus on getting levels that optimize your A/D converters. Most interfaces are calibrated for a sweet spot around -20dBFS to -16dBFS. Hitting this area as your target RMS level will almost always give you ideal tracks to mix.

Now if you’re sitting there scratching your head and not quite sure what all that means, don’t worry. Here’s a good rule of thumb to follow. Most meters in DAWs have a color coded display. Typically green is at the bottom followed by yellow, orange, and red. If you get your average level to hover right around where the green and yellow meet, then you’re in the ballpark. This means the middle point between your peak levels and your noise floor is close to that point where the meter changes colors.

Now of course it depends on what you’re recording. Different types of sound sources are going to give you different levels. Drums are going to have very sharp attacks that will yield higher peaks. Where as a vocal that isn’t too dynamic may just hover in the same area with little movement. One of the biggest problems that I see other engineers make is the level of their monitoring. Having your monitors up too loud or down to quiet will not truly give you a representation of the signal level. This is why you have to trust the meters and your DAW and let them show you what is actually happening with you levels. These are just pretty lights for you to look at while you’re working on your tracks. These are useful tools that can mean the difference between a good or bad mix.

It’s always a good idea to leave yourself some headroom when you’re tracking. You will want to have some space to mix and that is virtually impossible when your input levels hit -3dBFS or higher. Just be reasonable when you set your levels and keep in mind that you will be blending multiple tracks to mix down to your final print track.

NAMM 2019

It was another great year attending the NAMM convention in Anaheim. This year I focused on making some new connections and getting to know more about the industry. I met many talented musicians and innovative thinkers. Yet, the information available was what really refueled my passion for recording and mixing.

Tony Maserati - NAMM 2019

I heard some great lectures by Tony Maserati, Fab DuPont, and Jacquire King, just to name a few. Taking mixes and letting them take on a life of their own seemed to be the universal theme from many of these talented engineers. Using parallel aux tracks to blend layers of textures was a reassuring message since that is how I do many of my layering techniques. What I found the most interesting was how each of these pros set up their EQ and compression chains. Seeing and hearing how they shaped sound has really opened my thinking about how to approach a mix.

I’m going to be spending a lot of my free time to practice some of these techniques and start developing some new signal chains. This will create a new sound for all of my mixes that will benefit every client at the studio.

Among the many things to see, experience, and hear at the NAMM convention, I also spent some time listening to the educational talks that where happening at NAMM U. I’d love to share some of the ideas and techniques that were discussed at these lectures. Set ups some time to come by the studio and we can engage in a discussion that will definitely help you get a better understanding of the music industry and how it can be integrated into your marketing and social networks.

Vocal Mixing | Using delay to get wide vocals

Mixing vocals can have its challenges. Do not fret! There are ways to make your vocals big and wide without
laying on huge amounts of compression. Try this technique, add some side-chain delay sends from the main vocal. Add 3 or 4 sends with delays set to different lengths. Slowly bring up the faders on the delay tracks to blend the vocal into the mix. It's also a good idea to have different eq curves on each of the delay tracks. Play with filters to get the right tone for your mix.

How to start a recording studio | part 1

You've decided to start a recording studio. Now comes the planning for how to build your studio from the ground up. There are so many options, so let me help you consider a few that are crucial to the success of your new studio. I've been in the business for over 20 years now and I've seen what works and how well everything works. There are many different types of audio production studios, but for this segment, I'm going to focus on the beginner's project studio. Though you may have already started to build your studio, I'll be offering advice on things to consider for the success of all levels of studio production.

Before you spend too much time planning or spend any money on gear, take time to hash out your budget. You'll need to make some tough decisions about what is necessary now and what can be purchased down the road as the studio grows. Start a spreadsheet of your available finances and keep track of what you're spending. The last thing you want to do is buy a bunch of gear and then not have the funds to connect the pieces. There are things that many new studio engineers overlook and this is one main reason I'm writing this article.

First, you have to decide if you're going to be a PC or a MAC based computer system. You could get a new MAC and load Windows with the Parallels program. That's all up to you. There are advantages to both OS systems, so this decision has to fit with your configuration and your budget. PC systems are typically more affordable, but do carry the risk of more frequent crashing and data loss. MAC systems are more expensive and not as flexible as a PC based system. I'm not going to get too in-depth here, but if you'd like to post a comment, I'll do my best to respond.

For now, we'll assume that you've made your computer decision and you're ready to move on to the core of your system, the DAW. The DAW ( Digital Audio Workstation) is the heart of all digital recording studios. This is the interface that will provide recording and mixing capabilities for your studio. Most DAWs come with a hardware interface which does the A/D & D/A conversion for your audio. This is by far one of the most important choices to make when building your studio. The quality of audio conversion will ultimately impact the detail of the audio that comes out of your studio. The higher quality converters will give you a more accurate monitoring sound and yield a more dynamic range to your mixes. The beauty of most DAWs today, they will work with almost any interface you choose. This makes the options more bountiful and presents the opportunity for 3rd party companies to get into the market. Ultimately, this allows engineers the ability to mix and match software and hardware to customize a studio setup that is just right for their needs. Customize is such a great word and it is such a liberating concept!

I've personally worked with many different DAWs in my career and they all do a fine job of recording and mixing. There are some that only work on PC and some that only work on MAC, but most are cross-platform, so do pay attention to what is compatible with your system. The most widely used DAW is AVID's Pro Tools. Virtually every professional studio I've been in over the years is running Pro Tools as their primary DAW. It's not cheap software, but it is very user friendly with a mild learning curve. There are tons of books and videos out there to get you started working in Pro Tools and I'd recommend this as your primary DAW. The new line of AVID HD I/O interfaces have excellent converters and the audio quality is pristine. However, Pro Tools HD systems are not cheap. The entry level system is the Omni HD + Pro Tools HD Native and that starts at $4,999.00. Now there are some upgrade options, but just to get into Pro Tools HD, you may be spending a big chunk of your budget. If you can afford a quality interface, it will pay dividends down the road. Just be sure you are buying fear that you can grow into and not grow out of quickly. One pit fall I regularly encounter is folks who buy bargain gear with the intention of selling it when they need to upgrade. My warning is that you may not be able to sell the gear for a decent price, so don't rely on this strategy to recoup your capital funds.

Hope this was some useful insight for you to consider. Keep in mind there are many options out there and I highly recommend that you at least consider multiple DAWs and Hardware interfaces before you commit to purchasing. You should also look into financing your purchases and Sweetwater (.com) has some nice 0% interest for 24 months financing options. If you want to talk with my sales engineer, Joseph Secu x1232, he'll give you some good advice on what would work best for your setup. He's helped many of my clients purchase the right gear for their home studios and he's been helping me for over 14 years. I only have great things to say about Sweetwater and Mr. Secu.

Please leave any comments and I'll respond as soon as possible. Thanks for reading part 1 of this blog article. The next section I'll be discussing vocal microphones and preamps.