Gain Staging

Getting the right levels in your mix is the very first part of the recording process. Paying attention to your input levels can pay dividends when it comes to the mixing process. Proper levels will yield a much more streamlined workflow when it comes to sitting down to mix.

So you maybe asking yourself, “What are the proper levels that I should be trying to achieve?“

The answer to this question can vary. You have to have a vision for the end result. If you don’t have that vision, then you should focus on getting levels that optimize your A/D converters. Most interfaces are calibrated for a sweet spot around -20dBFS to -16dBFS. Hitting this area as your target RMS level will almost always give you ideal tracks to mix.

Now if you’re sitting there scratching your head and not quite sure what all that means, don’t worry. Here’s a good rule of thumb to follow. Most meters in DAWs have a color coded display. Typically green is at the bottom followed by yellow, orange, and red. If you get your average level to hover right around where the green and yellow meet, then you’re in the ballpark. This means the middle point between your peak levels and your noise floor is close to that point where the meter changes colors.

Now of course it depends on what you’re recording. Different types of sound sources are going to give you different levels. Drums are going to have very sharp attacks that will yield higher peaks. Where as a vocal that isn’t too dynamic may just hover in the same area with little movement. One of the biggest problems that I see other engineers make is the level of their monitoring. Having your monitors up too loud or down to quiet will not truly give you a representation of the signal level. This is why you have to trust the meters and your DAW and let them show you what is actually happening with you levels. These are just pretty lights for you to look at while you’re working on your tracks. These are useful tools that can mean the difference between a good or bad mix.

It’s always a good idea to leave yourself some headroom when you’re tracking. You will want to have some space to mix and that is virtually impossible when your input levels hit -3dBFS or higher. Just be reasonable when you set your levels and keep in mind that you will be blending multiple tracks to mix down to your final print track.

Prism Sound Titan

I’ve added a new flagship interface to the studio to add more clarity and depth to our production. I met Frank Oglethorpe at an event in San Francisco and got to hear the Atlas & Titan in action. The audio detail was giving me chills and put me in a space where the music was visual.

The Titan was in a small studio room that had treatment on the walls. It was an ideal situation to test out the ability of the DA and hear some recent mixes I’d just finished vs. mixes at the hosting studio. There was a difference in the low end where the frequencies had more depth without the mud. I immediately knew I had to demo a unit at my studio to hear if the mixes benefited from the converters in the Titan. 

Engineer David Hughes at Shine On Studio.

I connected with Jeff Briss from Cutting Edge Audio and got the approval from Frank to demo a Titan. When it arrived, I wasted no time connecting it to the HDX system. The first mix I played came to life and filled the room with rich detail and precision clarity. My eyes got large and my ears were saturated with excitement. This was such an amazing experience that I knew a Titan was the missing piece for the studio. 

I’ve had the Titan now for a few months and the response is exactly what I want to hear from my clients. Everyone loves the full sound and clarity that the audio has on every system they playback their music. This was a serious investment and it has already paid dividends that make it worth every penny.  

I highly recommend Prism Sound and their audio interfaces. Send me a message and I’ll hook you up with info on how you can connect with the right people to demo a unit for yourself.